Automatic conveying shot blasting machine to see what details to pay attention to the problem!

Roller through type shot blasting machine work process is controlled by electric adjustable speed of the roller conveyer to send steel structures or steel to a cleaning machine room body mass ejection area, its around the surface hit by powerful dense projectile from different coordinates azimuth and friction, make its scale, rust layer and its dirt falls off quickly, the steel surface is bright and clean surface with certain roughness, Loading and unloading workpieces in the inlet and outlet roller table on both sides outside the shot-blasting room.

Through type shot blasting machine filter should be how to maintain, for through type shot blasting machine may not have heard of many people, however, appear this kind of circumstance is normal, because it has a strong professional, only in the production of related with it, so for professionals, its maintenance is very important, because it can prolong the service life of through type shot blasting machine, Take a look at how to maintain it.

What is the function of the working system of the passing shot blasting machine

• Compact structure, mature use, small footprint;
  Sand blasting machine is the use of compressed air will sand material sprayed to the parts, to remove the oxide scale and other dirt process;
• After the complete work, the dust collector should be closed in time;
• Dust removal efficiency up to 95%;
• Structural characteristics of filter cartridge dust collector;
• Any workpiece in the range of width and height for shot blasting derusting strengthening. Automatic sand blasting machine;

Pay attention to the scattered projectiles on the ground around the shot blasting machine should be cleaned at any time and anywhere in time, in order to prevent slipping and wounding, causing accidents. The steel shot that falls on the ground is piled up (200kg) and successively added into the chamber body of the shot blasting machine, and then put into the workpiece, close the feeding door, ready to start;

• Insufficient supply of shot, appropriate supplement of new steel shot;
• If the shot blasting direction is not correct, adjust the position of the shot blasting directional sleeve window;
• The particle size of shot material is not suitable, and the particle size of shot material is re-selected;
• Pellets agglomerate or used for a long time, replace the pellets;